Completing Netgear Wireless Access Point Setup

Do you know that you don’t need to buy an extra network extender for increasing the range of your network? So, if you have the Netgear routers, then you need to complete the Netgear wireless access point setup. By this, you will not create the new network, but you will extend the range of the existing WiFi network. Obviously, it is more beneficial, as you don’t have to pay for an extra internet connection. Also, you can have better signal strength for the existing network. So, in order to know how to complete the Netgear access point setup, follow this article. So, let’s have a clear idea about it in the coming sections.

Steps for Netgear Wireless Access Point Setup

In order to change the Netgear router as the access point, you need to first complete the setup of the router by simply logging into the network. After that in the settings of the router, you need to change it as the access point. So, to know more in detail, go with the steps as mentioned below:

  • Step 1: First, connect the Netgear router, and your system with the Ethernet cable.
  • Step 2: Then, in your system, go to your favorite web browser.
  • Step 3: Now, visit http://www.routerlogin.com to reach the login screen of the Netgear router.
  • Step 4: If this link does not work, then you can use the default IP address for your router.
  • Step 5: The login screen will come up for the Netgear router.
  • Step 6: Now, in the username and password field, enter the default details.
  • Step 7: The default username is admin and the default password is password.
  • Step 8: Click on the Login button.
  • Step 9: The dashboard for the router settings will open up.
  • Step 10: Then, click on the Advanced option.
  • Step 11: After that, go to the Wireless Settings.
  • Step 12: Now, scroll the window to reach the AP mode option, and then enable it.
netgear-wireless-access-point-setup
  • Step 13: To enable it, select the Enable AP mode option.
  • Step 14: The IP address needs to be changed so that the network should not get confused with both routers.
  • Step 15: Therefore, you can set the IP address in a manual manner, but also you can set it dynamically.
  • Step 16: After making the changes, click on the Apply button.
  • Step 17: Now, connect your router and Netgear router with the ethernet cable to make the connection between them.

Login in AP mode

Now, your Netgear router is in AP mode. Therefore, now you need to login into the Netgear router in the AP mode to use it as the extender. The steps for login are as follows:

wifirepeateradmin
  • Step 1: First, connect your system to the existing main router’s network.
  • Step 2: Then, launch the web browser in your system.
  • Step 3: In the address field, enter the default IP address for your Netgear router.
  • Step 4: Here, the default IP address is the one that you have assigned during the AP setup either static or dynamically.
  • Step 5: Log in with the credentials if you have set the new one, otherwise use the default.
  • Step 6: Click on the Login button, and change the settings as you want.

Netgear Router is Extender Now!

By completing the  Netgear access point setup, you have changed your Netgear router to the extender now. Therefore, now with a single network, you can cover up the complete range of the home. Moreover, now you don’t need to buy a new internet connection for the new router. So, complete the  Netgear wireless access point setup, and have all the benefits of the extender.