Router Repeater Setup

Do you want to boost the home wireless signals to the long-distance? If so then there is an amazing technique with which you can receive an active and reliable internet connection. You can do this through router repeater setup or by turning an old router into a repeater. In this way, you can extend the WiFi network signals to even the darkest corners of your home. In case, you do not know the way to configure your repeater router then don’t worry! In this article, we will discuss the instructions that you need to follow for a router repeater setup. Let’s go ahead with it.

How to Use a Router as a Repeater to Extend Your Wi-Fi?

If you want to use the router as a repeater mode then you need to access the settings. You have to use the default IP address router to access the router login webpage. In case, you forget the IP address then make a factory default reset. Look at the below quick steps for Router Repeater Setup in order to extend the WiFi coverage:

  • Step 1: Firstly, connect your Router LAN port to the LAN port of your desktop or laptop.
  • Step 2: After that, you have to use the static IP address of the same series in the LAN settings of the computer or laptop.
  • Step 3: In the next step, launch any internet browser of your choice from your system. Thereafter, access your router’s IP address.
  • Step 4: Now, you have to enter the default login username and password as mentioned in the label attached with the router or the user manual.
  • Step 5: Once you log in to your router device, search for the wireless tab and then click on the wireless repeater.
  • Step 6: Next, you have to enable the Repeater Mode. Click on the checkbox to enable.
  • Step 7: At last, tap on the Site Survey button to find the Host WiFi network.

Simple Instructions to Configure Your Repeater Router

Go through the below instructions step by step to configure your repeater router:

  • Step 1: You first need to connect the Ethernet cable to the repeater router. Turn on your repeater router.
  • Step 2: Launch an internet browser from your system and enter the admin page URL i.e., in the address bar of the internet browser. Enter the default username and password.
  • Step 3: Search for the wireless repeater settings on the “Admin” page and make changes according to your preference. You can select the router’s mode either from the drop-down menu or checkbox.
  • Step 4: Once you reach the wireless repeater settings, change the Access Point to the repeater. Remember that, in a few routers, you need to create a WiFi bridge.
  • Step 5: After that, you have to enter the Mac address in your main router. Here, you will get other settings different
  • Step 6: Now, look for the LAN/ IP address settings. Make sure to turn off all the settings related to using it as a “DHCP Server”.
  • Step 7: Next, change the repeater router IP address to Ensure to write down the IP address as it is used to enter in the admin screen. Click on the apply button to save the settings made by you.
  • Step 8: Double-check the wireless settings. It should be the same as that of your main router including network name (SSID), Channel, security mode, and Mac authentication.
  • Step 9: Ensure that all the routers are turned on. Now, you have to wait for some time until the primary router is turned on.
  • Step 10: At last, you have to choose a spot to locate the repeater router at the location closer to the area where you get poor or weak WiFi signals. You can also place it on a different floor. Turn on your repeater router and check whether wireless signals get improved or not.

Thus, with the above-described details, you will get to know “How to Use a Router as a Repeater to Extend your Wi-Fi” without any hassle.